3rd International Conference on Energy, Environment and Sustainable Development, EESD 2013
Author(s):
NA
Format:
Conference presentation
Publisher:
Shanghai, 2014.
Series:
3rd International Conference on Energy, Environment and Sustainable Development, EESD 2013
Language:
English
Abstract:
The proceedings contain 596 papers. The special focus in this conference is on Energy, Environment and Sustainable Development. The topics include: Study on optimum installation angle of photovoltaic module considering sunlight reflection; a comprehensive MPPT algorithm of the solar batteries energy-saving control system; the study on a simplified model of photovoltaic power system; techno economic evaluation of biogas integrated parabolic trough solar energy combined cycle; design of linear Fresnel lens for concentrated photovoltaic system; a solar powered battery charger with pulse charging method and maximum power point tracking method; estimation of daily global solar radiation with measured meteorological data in Xining, China; selection of working fluids for medium temperature heat pipes used in parabolic trough solar receivers; review of economic operation optimization strategy of photovoltaic grid-connected system; high instantaneous efficiency and high flow rate slotted-plate solar collectors; numerical simulation study of a new type solar collector wall system; study on evacuated tubular solar air collector with inserted tubes; point-location problem for indoor daylight factor computations; periodic nanostructured thin-film solar cells; feasibility analysis of hybrid power system used on solar-powered aircraft; design and implementation of a photovoltaic power system with bi-directional inverter; research on short-term load prediction including the photovoltaic system; a numerical study on integral solar air collector; the study and design of 20kW photovoltaic power system; modular design of control system for photovoltaic inverter; research on control strategy of the stand-alone PV/battery system; research on the solar water heating system based on the internet of things; an optimized MPP tracking algorithm under partially shaded conditions in photovoltaic system; analysis of a new life cycle assessment model based on the solar building integrated technology; performance study of a solar adsorption refrigeration system; the equivalent method of wind farms considering wake effect; slip analysis of wind turbine angular contact ball bearing; SPIV analysis of the tip vortex evolution of a horizontal axis wind turbine; research of aggregated wind power prediction method for a region; analysis of power flow on power system with wind power grid; modeling and analysis of large-scale wind power cluster effect; effect of wind farm on transient and small-signal stability based on BPA; a new structure for low speed wind turbine in built-up areas; numerical simulation study of wind and wave energy in yellow river delta; analysis on low-carbon comprehensive benefit of wind power; research on preventive maintenance cycle decision of wind turbine; study on automatic active power control system of wind farms; the power of wind turbine generators prediction model based on time series; regional wind power forecasting based on cloud model and wind rate vector; an multi-objective optimization model for wind-storage combined operation; a MPPT strategy for wind power PMSG system with full power converter; progress of biomass gasification technology in China; feature analysis during corn stover being enzymatic hydrolyzed into fermentable sugars; biomass catalysis pyrolysis for furans chemicals; research progress on biomass liquid-fuel products by thermo-chemical conversion; formic acid production from hydrothermal reaction of cellulose; hydrothermal conversion of cellulose into organic acids by metal oxides; conversion of microalgae under hydrothermal conditions; dynamic model of rapeseed oil hydrolysis reaction in sub-critical water; unconventional type of biomass suitable for the production of biofuels; experimental research of biomass pyrolysis characteristics at low temperature; potassium solubility of the fly ash from corn straw power plant; marginal land-based biomass energy production in yellow river delta; application of technology of the internet of things on the monitoring of geothermal field; optimal sizing of battery energy storage system in distribution network; simulation on control strategies of hybrid energy storage; thermal conductivity enhancement in a latent heat storage device; the isolation DC-DC partial voltage charge equalization on lithium-ion power battery; the passive ventilation energy-saving strategies of urban long-distance bus station; greenhouse earth to air heat exchanger and its research progress; study of the energy consumption characteristic of a 1000MW ultra-supercritical unit; review on the heat transfer enhancement by inserting circular cylinders; the application of the green energy in HVAC; optimization of condenser vacuum based on neural network and SA-BBO; simulation and analysis of ship energy efficiency operation index; energy-saving blast dehumidification system for blast furnace; numerical simulation of corrugated depth on the performance of plate heat exchanger; the research on energy saving of pump fluid conveying system; co-benefit analysis on fuel-switching project for district heating; application research of reclaimed water source heat pump techniques in Beijing; research on reclaimed water heat energy conditions and application in Beijing; research on the industrial energy use of sustainable development test zone in Beijing; review of study on the early-warning system of energy conservation; investigation on the simulation of control strategy for a SCR system; study on creep behaviors of T92 steel under multiaxial stress state; research on resistance spot welding of DP980 dual phase steel; the analysis of current implementation mechanism of green power; a review of Pt-based anode catalysts preparation for direct ethanol fuel cell; new progress in microbial fuel cells and its outlook; a review of Pd-based electrocatalyst for the ethanol oxidation reaction in alkaline medium; analysis on some key problems of high power DCDC converter for fuel cell electrical bus; preparation of SiO2 antireflective film by a base/acid two-step catalyzed sol-gel process; progress of research on modification in polybutylene terephthalate; an inverse research method for the radiation characteristics based on particle swarm optimization algorithm; finite element analysis of piezoelectric materials; analysis on the micro surface morphology of aged oil-paper used in power transformer; preparation and characterization of porous silica antireflective thin film on glass substrates by chemical etching; photocatalysis reactivity in the visible light of B-doped TiO2 nanotube arrays; the development trends of renewable energy at home and abroad and material problems; optimizing design of LEDs with photonic crystal and planer micro cavity for high extraction efficiency; experimental study on the preparation process of binary carbonate salts; review on phase change material slurries; study on Al2O3 coated carbon sulfur composite materials for lithium-ion battery; analysis on fracture morphology and microstructure of T92 steel after high temperature multiaxial creep; research on creep-fatigue life prediction for P92 steel under stress-controlled state; laboratory simulation of radon migration in porous aquifer medium; N2 and CO desorption from interaction between NO and nitrogen-containing char; experiment research on power molding and destructive distillation of Yaojie oil shale; the effect of lignite catalytic pyrolysis on liquid components; synthesis of guerbet alcohol acrylate aided by microwave; kinetics analysis of wheat straw pulping process; effect of rare earth for removal of carbonyl sulfide from synthesis gas; development of polymer gel plugging removal agent in suizhong 361 oilfield; analysis on factors affecting biodiesel production rate based on probability theory; the calculation of physicochemical parameters in the mimetite dissolving process; exploring of the effects of ionic liquids on methane hydrate formation; a study on the spray characteristics of SIDI CNG engine based on a visualization system; space-time modeling of plug-in electric vehicles; test and simulation system of multi-axis controller; coordinated control for novel full hybrid vehicles; study on factors affecting the range of electric vehicle with ADVISOR; testing of remote monitoring calibration and diagnostic system for electric vehicle; technical economic analysis on V2G mode shifting peak load; a study on the factors affecting consumers adoption toward environmentally friendly car - hybrid car; modeling and simulation of LiFePO4 battery for electric vehicle; comparative analysis on emission between hybrid and conventional vehicles; the application of PLC in the electric vehicle AC charging technology; review of research on coordinated charging of electric vehicles; study on the regularity of EVs' charging and discharging group behaviors; an lectotype analysis of the architectural structure of the Hmong in Hunan; foam concrete through electric technology; settlement of cellulose insulation; the interpretation of Norman foster's architectural design conception; airtightness and acoustic properties of family house from straw; cooling effect of waste fiber culture medium used as extensive green roof; decorative arts of gates detail components in Chinese traditional architecture; properties of the dry masonry mixtures with hollow ceramics microspheres; development of masonry components protected against moisture; heat insulation research on double-skin of architecture in hot summer area; prediction study of capillary rise height on unsaturated soil; experimental study in gangue base-course mixture materials for pavement; analysis of eco-design strategy of public buildings in large space; reinforcement and reconstruction of rural breeding sheds; application of BIM technology in green building engineering construction.